# 12.2 The MPS File Format¶

MOSEK supports the standard MPS format with some extensions. For a detailed description of the MPS format see the book by Nazareth [Naz87].

## 12.2.1 MPS File Structure¶

The version of the MPS format supported by MOSEK allows specification of an optimization problem of the form

(12.2)$\begin{split}\begin{array} {rcccl} \maximize/\minimize & & c^Tx +q_0(x) & & \\ l^c & \leq & A x + q(x) & \leq & u^c, \\ l^x & \leq & x & \leq & u^x, \\ & & x \in \K, & & \\ & & x_{\mathcal{J}}\ \mbox{ integer}, & & \end{array}\end{split}$

where

• $$x \in \real^n$$ is the vector of decision variables.

• $$A \in \real^{m\times n}$$ is the constraint matrix.

• $$l^c \in \real^m$$ is the lower limit on the activity for the constraints.

• $$u^c \in \real^m$$ is the upper limit on the activity for the constraints.

• $$l^x \in \real^n$$ is the lower limit on the activity for the variables.

• $$u^x \in \real^n$$ is the upper limit on the activity for the variables.

• $$q: \real^n \rightarrow \real$$ is a vector of quadratic functions. Hence,

$q_i(x) = \half x^T Q^i x$

where it is assumed that $$Q^i = (Q^i)^T$$. Please note the explicit $$\half$$ in the quadratic term and that $$Q^i$$ is required to be symmetric. The same applies to $$q_0$$.

• $$\K$$ is a convex cone.

• $$\mathcal{J} \subseteq \{1,2,\ldots ,n\}$$ is an index set of the integer-constrained variables.

• $$c$$ is the vector of objective coefficients.

An MPS file with one row and one column can be illustrated like this:

*        1         2         3         4         5         6
*23456789012345678901234567890123456789012345678901234567890
NAME          [name]
OBJSENSE
[objsense]
OBJNAME       [objname]
ROWS
?  [cname1]
COLUMNS
[vname1]  [cname1]  [value1]       [cname2]  [value2]
RHS
[name]    [cname1]  [value1]       [cname2]  [value2]
RANGES
[name]    [cname1]  [value1]       [cname2]  [value2]
QSECTION      [cname1]
[vname1]  [vname2]  [value1]       [vname3]  [value2]
QMATRIX
[vname1]  [vname2]  [value1]
[vname1]  [vname2]  [value1]
QCMATRIX      [cname1]
[vname1]  [vname2]  [value1]
BOUNDS
?? [name]    [vname1]  [value1]
CSECTION      [kname1]  [value1]       [ktype]
[vname1]
ENDATA


Here the names in capitals are keywords of the MPS format and names in brackets are custom defined names or values. A couple of notes on the structure:

• Fields: All items surrounded by brackets appear in fields. The fields named “valueN” are numerical values. Hence, they must have the format

[+|-]XXXXXXX.XXXXXX[[e|E][+|-]XXX]


where

X = [0|1|2|3|4|5|6|7|8|9].

• Sections: The MPS file consists of several sections where the names in capitals indicate the beginning of a new section. For example, COLUMNS denotes the beginning of the columns section.

• Comments: Lines starting with an * are comment lines and are ignored by MOSEK.

• Keys: The question marks represent keys to be specified later.

• Extensions: The sections QSECTION and CSECTION are specific MOSEK extensions of the MPS format. The sections QMATRIX, QUADOBJ and QCMATRIX are included for sake of compatibility with other vendors extensions to the MPS format.

• The standard MPS format is a fixed format, i.e. everything in the MPS file must be within certain fixed positions. MOSEK also supports a free format. See Sec. 12.2.5 (The Free MPS Format) for details.

Linear example lo1.mps

A concrete example of a MPS file is presented below:

* File: lo1.mps
NAME          lo1
OBJSENSE
MAX
ROWS
N  obj
E  c1
G  c2
L  c3
COLUMNS
x1        obj       3
x1        c1        3
x1        c2        2
x2        obj       1
x2        c1        1
x2        c2        1
x2        c3        2
x3        obj       5
x3        c1        2
x3        c2        3
x4        obj       1
x4        c2        1
x4        c3        3
RHS
rhs       c1        30
rhs       c2        15
rhs       c3        25
RANGES
BOUNDS
UP bound     x2        10
ENDATA


Subsequently each individual section in the MPS format is discussed.

### 12.2.1.1 NAME (optional)¶

In this section a name ([name]) is assigned to the problem.

### 12.2.1.2 OBJSENSE (optional)¶

This is an optional section that can be used to specify the sense of the objective function. The OBJSENSE section contains one line at most which can be one of the following:

MIN
MINIMIZE
MAX
MAXIMIZE


It should be obvious what the implication is of each of these four lines.

### 12.2.1.3 OBJNAME (optional)¶

This is an optional section that can be used to specify the name of the row that is used as objective function. objname should be a valid row name.

### 12.2.1.4 ROWS¶

A record in the ROWS section has the form

?  [cname1]


where the requirements for the fields are as follows:

Field

Starting Position

Max Width

required

Description

?

2

1

Yes

Constraint key

[cname1]

5

8

Yes

Constraint name

Hence, in this section each constraint is assigned a unique name denoted by [cname1]. Please note that [cname1] starts in position 5 and the field can be at most 8 characters wide. An initial key ? must be present to specify the type of the constraint. The key can have values E, G, L, or N with the following interpretation:

Constraint type

$$l_{i}^{c}$$

$$u_i^c$$

E (equal)

finite

$$=l_i^c$$

G (greater)

finite

$$\infty$$

L (lower)

$$-\infty$$

finite

N (none)

$$-\infty$$

$$\infty$$

In the MPS format the objective vector is not specified explicitly, but one of the constraints having the key N will be used as the objective vector $$c$$ . In general, if multiple N type constraints are specified, then the first will be used as the objective vector $$c$$, unless something else was specified in the section OBJNAME.

### 12.2.1.5 COLUMNS¶

In this section the elements of $$A$$ are specified using one or more records having the form:

[vname1]  [cname1]    [value1]     [cname2]  [value2]


where the requirements for each field are as follows:

Field

Starting Position

Max Width

required

Description

[vname1]

5

8

Yes

Variable name

[cname1]

15

8

Yes

Constraint name

[value1]

25

12

Yes

Numerical value

[cname2]

40

8

No

Constraint name

[value2]

50

12

No

Numerical value

Hence, a record specifies one or two elements $$a_{ij}$$ of $$A$$ using the principle that [vname1] and [cname1] determines $$j$$ and $$i$$ respectively. Please note that [cname1] must be a constraint name specified in the ROWS section. Finally, [value1] denotes the numerical value of $$a_{ij}$$ . Another optional element is specified by [cname2], and [value2] for the variable specified by [vname1]. Some important comments are:

• All elements belonging to one variable must be grouped together.

• Zero elements of $$A$$ should not be specified.

• At least one element for each variable should be specified.

### 12.2.1.6 RHS (optional)¶

A record in this section has the format

[name]    [cname1]    [value1]     [cname2]  [value2]


where the requirements for each field are as follows:

Field

Starting Position

Max Width

required

Description

[name]

5

8

Yes

Name of the RHS vector

[cname1]

15

8

Yes

Constraint name

[value1]

25

12

Yes

Numerical value

[cname2]

40

8

No

Constraint name

[value2]

50

12

No

Numerical value

The interpretation of a record is that [name] is the name of the RHS vector to be specified. In general, several vectors can be specified. [cname1] denotes a constraint name previously specified in the ROWS section. Now, assume that this name has been assigned to the $$i$$ -h constraint and $$v_1$$ denotes the value specified by [value1], then the interpretation of $$v_1$$ is:

Constraint

$$l_i^c$$

$$u_i^c$$

E

$$v_1$$

$$v_1$$

G

$$v_1$$

L

$$v_1$$

N

An optional second element is specified by [cname2] and [value2] and is interpreted in the same way. Please note that it is not necessary to specify zero elements, because elements are assumed to be zero.

### 12.2.1.7 RANGES (optional)¶

A record in this section has the form

[name]    [cname1]    [value1]     [cname2]  [value2]


where the requirements for each fields are as follows:

Field

Starting Position

Max Width

required

Description

[name]

5

8

Yes

Name of the RANGE vector

[cname1]

15

8

Yes

Constraint name

[value1]

25

12

Yes

Numerical value

[cname2]

40

8

No

Constraint name

[value2]

50

12

No

Numerical value

The records in this section are used to modify the bound vectors for the constraints, i.e. the values in $$l^c$$ and $$u^c$$ . A record has the following interpretation:[name] is the name of the RANGE vector and [cname1] is a valid constraint name. Assume that [cname1] is assigned to the $$i$$-th constraint and let $$v_1$$ be the value specified by [value1], then a record has the interpretation:

Constraint type

Sign of $$v_1$$

$$l_i^c$$

$$u_i^c$$

E

$$-$$

$$u_i^c+v_1$$

E

$$+$$

$$l_i^c+v_1$$

G

$$-$$ or $$+$$

$$l_i^c+|v_1|$$

L

$$-$$ or $$+$$

$$u_i^c-|v_1|$$

N

Another constraint bound can optionally be modified using [cname2] and [value2] the same way.

### 12.2.1.8 QSECTION (optional)¶

Within the QSECTION the label [cname1] must be a constraint name previously specified in the ROWS section. The label [cname1] denotes the constraint to which the quadratic terms belong. A record in the QSECTION has the form

[vname1]  [vname2]    [value1]     [vname3]  [value2]


where the requirements for each field are:

Field

Starting Position

Max Width

required

Description

[vname1]

5

8

Yes

Variable name

[vname2]

15

8

Yes

Variable name

[value1]

25

12

Yes

Numerical value

[vname3]

40

8

No

Variable name

[value2]

50

12

No

Numerical value

A record specifies one or two elements in the lower triangular part of the $$Q^i$$ matrix where [cname1] specifies the $$i$$ . Hence, if the names [vname1] and [vname2] have been assigned to the $$k$$-th and $$j$$-th variable, then $$Q_{kj}^i$$ is assigned the value given by [value1] An optional second element is specified in the same way by the fields [vname1], [vname3], and [value2].

The example

$\begin{split}\begin{array}{lccl} \mbox{minimize} & -x_2 + \frac{1}{2} ( 2 x_1^2 - 2 x_1 x_3 + 0.2 x_2^2 + 2 x_3^2 ) & & \\ \mbox{subject to} & x_1 + x_2 + x_3 & \geq & 1, \\ & x \geq 0 & & \end{array}\end{split}$

has the following MPS file representation

* File: qo1.mps
NAME          qo1
ROWS
N  obj
G  c1
COLUMNS
x1        c1        1.0
x2        obj       -1.0
x2        c1        1.0
x3        c1        1.0
RHS
rhs       c1        1.0
QSECTION      obj
x1        x1        2.0
x1        x3        -1.0
x2        x2        0.2
x3        x3        2.0
ENDATA


Regarding the QSECTIONs please note that:

• Only one QSECTION is allowed for each constraint.

• The QSECTIONs can appear in an arbitrary order after the COLUMNS section.

• All variable names occurring in the QSECTION must already be specified in the COLUMNS section.

• All entries specified in a QSECTION are assumed to belong to the lower triangular part of the quadratic term of $$Q$$ .

### 12.2.1.9 QMATRIX/QUADOBJ (optional)¶

The QMATRIX and QUADOBJ sections allow to define the quadratic term of the objective function. They differ in how the quadratic term of the objective function is stored:

• QMATRIX stores all the nonzeros coefficients, without taking advantage of the symmetry of the $$Q$$ matrix.

• QUADOBJ stores the upper diagonal nonzero elements of the $$Q$$ matrix.

A record in both sections has the form:

[vname1]  [vname2]    [value1]


where the requirements for each field are:

Field

Starting Position

Max Width

required

Description

[vname1]

5

8

Yes

Variable name

[vname2]

15

8

Yes

Variable name

[value1]

25

12

Yes

Numerical value

A record specifies one elements of the $$Q$$ matrix in the objective function . Hence, if the names [vname1] and [vname2] have been assigned to the $$k$$-th and $$j$$-th variable, then $$Q_{kj}$$ is assigned the value given by [value1]. Note that a line must appear for each off-diagonal coefficient if using a QMATRIX section, while only one entry is required in a QUADOBJ section. The quadratic part of the objective function will be evaluated as $$1/2x^T Q x$$.

The example

$\begin{split}\begin{array}{lccl} \mbox{minimize} & -x_2 + \frac{1}{2} (2 x_1^2 - 2 x_1 x_3 + 0.2 x_2^2 + 2 x_3^2 ) & & \\ \mbox{subject to} & x_1+x_2+x_3 & \geq & 1, \\ & x \geq 0 & & \end{array}\end{split}$

has the following MPS file representation using QMATRIX

* File: qo1_matrix.mps
NAME          qo1_qmatrix
ROWS
N  obj
G  c1
COLUMNS
x1        c1        1.0
x2        obj       -1.0
x2        c1        1.0
x3        c1        1.0
RHS
rhs       c1        1.0
QMATRIX
x1        x1        2.0
x1        x3        -1.0
x3        x1        -1.0
x2        x2        0.2
x3        x3        2.0
ENDATA


or the following using QUADOBJ

* File: qo1_quadobj.mps
ROWS
N  obj
G  c1
COLUMNS
x1        c1        1.0
x2        obj       -1.0
x2        c1        1.0
x3        c1        1.0
RHS
rhs       c1        1.0
x1        x1        2.0
x1        x3        -1.0
x2        x2        0.2
x3        x3        2.0
ENDATA


• A QMATRIX/QUADOBJ section can appear in an arbitrary order after the COLUMNS section.

• All variable names occurring in the QMATRIX/QUADOBJ section must already be specified in the COLUMNS section.

### 12.2.1.10 QCMATRIX (optional)¶

A QCMATRIX section allows to specify the quadratic part of a given constraint. Within the QCMATRIX the label [cname1] must be a constraint name previously specified in the ROWS section. The label [cname1] denotes the constraint to which the quadratic term belongs. A record in the QSECTION has the form

[vname1]  [vname2]    [value1]


where the requirements for each field are:

Field

Starting Position

Max Width

required

Description

[vname1]

5

8

Yes

Variable name

[vname2]

15

8

Yes

Variable name

[value1]

25

12

Yes

Numerical value

A record specifies an entry of the $$Q^i$$ matrix where [cname1] specifies the $$i$$. Hence, if the names [vname1] and [vname2] have been assigned to the $$k$$-th and $$j$$-th variable, then $$Q_{kj}^i$$ is assigned the value given by [value1]. Moreover, the quadratic term is represented as $$1/2 x^T Q x$$.

The example

$\begin{split}\begin{array}{lccl} \mbox{minimize} & x_2 & & \\ \mbox{subject to} & x_1+x_2+x_3 & \geq & 1, \\ & \frac{1}{2} ( - 2 x_1 x_3 + 0.2 x_2^2 + 2 x_3^2 )& \leq & 10,\\ & x \geq 0 & & \end{array}\end{split}$

has the following MPS file representation

* File: qo1.mps
NAME          qo1
ROWS
N  obj
G  c1
L  q1
COLUMNS
x1        c1        1.0
x2        obj       -1.0
x2        c1        1.0
x3        c1        1.0
RHS
rhs       c1        1.0
rhs       q1        10.0
QCMATRIX      q1
x1        x1        2.0
x1        x3        -1.0
x3        x1        -1.0
x2        x2        0.2
x3        x3        2.0
ENDATA


Regarding the QCMATRIXs please note that:

• Only one QCMATRIX is allowed for each constraint.

• The QCMATRIXs can appear in an arbitrary order after the COLUMNS section.

• All variable names occurring in the QSECTION must already be specified in the COLUMNS section.

• QCMATRIX does not exploit the symmetry of $$Q$$: an off-diagonal entry $$(i,j)$$ should appear twice.

### 12.2.1.11 BOUNDS (optional)¶

In the BOUNDS section changes to the default bounds vectors $$l^x$$ and $$u^x$$ are specified. The default bounds vectors are $$l^x = 0$$ and $$u^x = \infty$$ . Moreover, it is possible to specify several sets of bound vectors. A record in this section has the form

?? [name]    [vname1]    [value1]


where the requirements for each field are:

Field

Starting Position

Max Width

Required

Description

??

2

2

Yes

Bound key

[name]

5

8

Yes

Name of the BOUNDS vector

[vname1]

15

8

Yes

Variable name

[value1]

25

12

No

Numerical value

Hence, a record in the BOUNDS section has the following interpretation:[name] is the name of the bound vector and [vname1] is the name of the variable for which the bounds are modified by the record. ?? and [value1] are used to modify the bound vectors according to the following table:

??

$$l_j^x$$

$$u_j^x$$

Made integer (added to $$\mathcal{J}$$)

FR

$$-\infty$$

$$\infty$$

No

FX

$$v_1$$

$$v_1$$

No

LO

$$v_1$$

unchanged

No

MI

$$-\infty$$

unchanged

No

PL

unchanged

$$\infty$$

No

UP

unchanged

$$v_1$$

No

BV

$$0$$

$$1$$

Yes

LI

$$\lceil v_1 \rceil$$

unchanged

Yes

UI

unchanged

$$\lfloor v_1 \rfloor$$

Yes

Here $$v_1$$ is the value specified by [value1].

### 12.2.1.12 CSECTION (optional)¶

The purpose of the CSECTION is to specify the conic constraint

$x \in \K$

in (12.2). It is assumed that $$\K$$ satisfies the following requirements. Let

$x^t \in \real^{n^t}, \quad t=1,\ldots ,k$

be vectors comprised of parts of the decision variables $$x$$ so that each decision variable is a member of exactly one vector $$x^t$$, for example

$\begin{split}x^1 = \left[ \begin{array} {c} x_1 \\ x_4 \\ x_7 \end{array} \right] \quad \mbox{ and }\quad x^2 = \left[ \begin{array} {c} x_6 \\ x_5 \\ x_3 \\ x_2 \end{array} \right].\end{split}$

Next define

$\K := \left\lbrace x \in \real^n: \quad x^t \in \K_t,\quad t=1,\ldots ,k \right\rbrace$

where $$\K_t$$ must have one of the following forms:

• $$\real$$ set:

$\K_t = \real^{n^t}.$
• Zero cone:

(12.3)$\K_t = \left\lbrace 0 \right\rbrace \subseteq \real^{n^t}.$

(12.4)$\K_t = \left\lbrace x \in \real^{n^t}: x_1 \geq \sqrt{\sum_{j=2}^{n^t} x_j^2} \right\rbrace.$

(12.5)$\K_t = \left\lbrace x \in \real^{n^t}: 2 x_1 x_2 \geq \sum_{j=3}^{n^t} x_j^2,\quad x_1,x_2 \geq 0 \right\rbrace.$
• Primal exponential cone:

(12.6)$\K_t = \left\lbrace x \in \real^{3}: x_1\geq x_2\exp(x_3/x_2),\quad x_1,x_2 \geq 0 \right\rbrace.$
• Primal power cone (with parameter $$0< \alpha< 1$$):

(12.7)$\K_t = \left\lbrace x \in \real^{n^t}: x_1^\alpha x_2^{1-\alpha}\geq \sqrt{\sum_{j=3}^{n^t} x_j^2},\quad x_1,x_2 \geq 0 \right\rbrace.$
• Dual exponential cone:

(12.8)$\K_t = \left\lbrace x \in \real^{3}: x_1 \geq -x_3 e^{-1}\exp(x_2/x_3), \quad x_3\leq 0,x_1 \geq 0 \right\rbrace.$
• Dual power cone (with parameter $$0< \alpha< 1$$):

(12.9)$\K_t = \left\lbrace x \in \real^{n^t}: \left(\frac{x_1}{\alpha}\right)^\alpha \left(\frac{x_2}{1-\alpha}\right)^{1-\alpha} \geq \sqrt{\sum_{j=3}^{n^t} x^2_j}, \quad x_1, x_2 \geq 0 \right\rbrace.$

In general, membership in the $$\real$$ set is not specified. If a variable is not a member of any other cone then it is assumed to be a member of the $$\real$$ cone.

Next, let us study an example. Assume that the power cone

$x_4^{1/3}x_5^{2/3}\geq |x_8|$

$2 x_3 x_7 \geq x_1^2 + x_0^2, \quad x_3,x_7 \geq 0,$

should be specified in the MPS file. One CSECTION is required for each cone and they are specified as follows:

*        1         2         3         4         5         6
*23456789012345678901234567890123456789012345678901234567890
CSECTION      konea     3e-1           PPOW
x4
x5
x8
x7
x3
x1
x0


In general, a CSECTION header has the format

CSECTION      [kname1]    [value1]     [ktype]


where the requirements for each field are as follows:

Field

Starting Position

Max Width

Required

Description

[kname1]

15

8

Yes

Name of the cone

[value1]

25

12

No

Cone parameter

[ktype]

40

Yes

Type of the cone.

The possible cone type keys are:

[ktype]

Members

[value1]

Interpretation.

ZERO

$$\geq 0$$

unused

Zero cone (12.3).

QUAD

$$\geq 1$$

unused

RQUAD

$$\geq 2$$

unused

PEXP

$$3$$

unused

Primal exponential cone (12.6).

PPOW

$$\geq 2$$

$$\alpha$$

Primal power cone (12.7).

DEXP

$$3$$

unused

Dual exponential cone (12.8).

DPOW

$$\geq 2$$

$$\alpha$$

Dual power cone (12.9).

A record in the CSECTION has the format

[vname1]


where the requirements for each field are

Field

Starting Position

Max Width

required

Description

[vname1]

5

8

Yes

A valid variable name

A variable must occur in at most one CSECTION.

### 12.2.1.13 ENDATA¶

This keyword denotes the end of the MPS file.

## 12.2.2 Integer Variables¶

Using special bound keys in the BOUNDS section it is possible to specify that some or all of the variables should be integer-constrained i.e. be members of $$\mathcal{J}$$. However, an alternative method is available. This method is available only for backward compatibility and we recommend that it is not used. This method requires that markers are placed in the COLUMNS section as in the example:

COLUMNS
x1        obj       -10.0          c1        0.7
x1        c2        0.5            c3        1.0
x1        c4        0.1
* Start of integer-constrained variables.
MARK000   'MARKER'                 'INTORG'
x2        obj       -9.0           c1        1.0
x2        c2        0.8333333333   c3        0.66666667
x2        c4        0.25
x3        obj       1.0            c6        2.0
MARK001   'MARKER'                 'INTEND'
* End of integer-constrained variables.


Please note that special marker lines are used to indicate the start and the end of the integer variables. Furthermore be aware of the following

• All variables between the markers are assigned a default lower bound of 0 and a default upper bound of 1. This may not be what is intended. If it is not intended, the correct bounds should be defined in the BOUNDS section of the MPS formatted file.

• MOSEK ignores field 1, i.e. MARK0001 and MARK001, however, other optimization systems require them.

• Field 2, i.e. MARKER, must be specified including the single quotes. This implies that no row can be assigned the name MARKER.

• Field 3 is ignored and should be left blank.

• Field 4, i.e. INTORG and INTEND, must be specified.

• It is possible to specify several such integer marker sections within the COLUMNS section.

## 12.2.3 General Limitations¶

• An MPS file should be an ASCII file.

## 12.2.4 Interpretation of the MPS Format¶

Several issues related to the MPS format are not well-defined by the industry standard. However, MOSEK uses the following interpretation:

• If a matrix element in the COLUMNS section is specified multiple times, then the multiple entries are added together.

• If a matrix element in a QSECTION section is specified multiple times, then the multiple entries are added together.

## 12.2.5 The Free MPS Format¶

MOSEK supports a free format variation of the MPS format. The free format is similar to the MPS file format but less restrictive, e.g. it allows longer names. However, a name must not contain any blanks.

Moreover, by default a line in the MPS file must not contain more than 1024 characters. By modifying the parameter MSK_IPAR_READ_MPS_WIDTH an arbitrary large line width will be accepted.

The free MPS format is default. To change to the strict and other formats use the parameter MSK_IPAR_READ_MPS_FORMAT.